Heavy load reclining pallet inverter
Project Information
Wuxi BuHui’s Heavy-Load Reclining Pallet Inverter streamlines pallet inversion for loads up to 15 t, lowering to ground level for jack access, reclining 90° and rotating 180° to invert pallets under one minute, boosting operational safety and dramatically cutting changeover time.
Key Features (Abbreviated)
Ground-level 9.5 mm platform for pallet-jack access (no forklift)
90° recline & 180° rotation in < 60 s
Clamp bars adjustable in 50 mm increments
PLC or wireless remote, push-button operation
Automate Heavy-Pallet Changeovers
Inefficient swaps stall production, especially with wide, tall, or >1 t loads. Wuxi BuHui’s Heavy-Load Reclining Pallet Inverter lowers to 9.5 mm for jack access, reclines 90° and rotates 180° to invert up to 15 t—no manual restacking, minimal downtime.
The Challenge
- Slow changeovers: Forklifts and operators tied up
- Damage risk: Heavy manual restacking causes injury and product loss
- Space limits: Full-size inverters won’t fit compact areas
The Solution: Heavy-Load Reclining Inverter
| Feature | Benefit / ROI |
|---|---|
| Ground-level platform (9.5 mm) | Use pallet jack—no forklift needed; cuts equipment cost |
| 90° recline + 180° rotate | Invert pallets in<60 s; slashes changeover time |
| Single or dual clamps | Secure any width/height; eliminates slippage and damage |
| Adjustable clamp bars | Custom-fit pallets in 50 mm increments; boosts SKU flexibility |
| PLC or remote control | Push-button automation; reduces operator steps |
| Safety interlocks & guards | Full perimeter protection; meets industry standards |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | FPFZ-1 |
| Max Load Capacity | 15 t |
| Platform Size | 1 200 × 1 100–1 200 mm |
| Recline Angle | 90° |
| Rotation Angle | 180° |
| Turnover Time | ≈ 50 s |
| Drive | Hydraulic cylinders & cast-iron pump |
| Control | PLC / wireless remote |
| Power Supply | 380 V, 50 Hz, 3-phase |
Heavy load reclining pallet inverter enables rapid pallet replacement and broken-pallet swaps by tipping loads 90° onto their backs, centralizing them on a turntable. Its single or dual clamping tables adapt to custom widths and depths for safe, high-capacity handling.
Inquire About This Project
Contact Information
- +8613951501635
- info@cnbhpac.com
- +8613951501635